Pattern Vinyl
The Clover Patch offers printed patterns on Oracal permanent adhesive and Siser heat transfer vinyl. Our designs have been created by combining graphic/font elements and artwork with original design work. You may use any design for your personal or commercial use.
With every order that contains a heat transfer sheet, we provide one complimentary TTD Medium Tack Mask/Carrier sheet. The mask is reusable for 2-5 times so make sure to save the paper liner and re-stick it between presses!
To order additional TTD Medium Tack Mask/Carrier sheets (click here).
Heat Transfer Application Instructions (home iron) • Cut material – don’t mirror! • Weed excess material • Mask with TTD High Tack Mask/Carrier Sheet • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 15 seconds • If areas of design lift after application, replace cover sheet and re-press for 10 seconds • Peel carrier hot or cold |
Heat Transfer Application Instructions (heat press) • Cut material – don’t mirror! • Weed excess material • Mask with TTD Mask Tack Mask/Carrier Sheet • Preheat garment for 2-3 seconds • Apply design at 305°F/150°C • Use medium pressure for 10-15 seconds • Peel carrier hot or cold |