Basketball Black

$4.00
Write a Review

The Clover Patch offers printed patterns on Oracal permanent adhesive and Siser heat transfer vinyl. Our designs have been created by combining graphic/font elements and artwork with original design work. You may use any design for your personal or commercial use.

With every order that contains a heat transfer sheet, we provide one complimentary TTD Medium Tack Mask/Carrier sheet.  The mask is reusable for 2-5 times so make sure to save the paper liner and re-stick it between presses! 

To order additional TTD Medium Tack Mask/Carrier sheets (click here).

Heat Transfer Application Instructions (home iron)

• Cut material – don’t mirror!
• Weed excess material
• Mask with TTD High Tack Mask/Carrier Sheet
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier hot or cold
Heat Transfer Application Instructions (heat press)

• Cut material – don’t mirror!
• Weed excess material
• Mask with TTD Mask Tack Mask/Carrier Sheet
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold